You should keep the pole at a minimum length of 1.5m. Any longer and youll have trouble keeping it from wrapping around the branch or tree thats being cut. Cutting with shorter poles is difficult. If your pole is too short, consider using a shorter blade, which can cut branches with diameters as large as 4 cm (3,8 cm).
-
First, determine what side of the tree or branch you need to cut on, then tie the pole saws cable into that position. This can be done with any kind of knot but we recommend using the bowline knot as it is stable and easy to untie.
-
After you have tied the cable, ensure that there is a little slack at each end. Next, remove the pole saw from the holster on your opposite side of the area where you are going to cut. You could get hurt if there isn’t enough slack. This can cause friction when you attempt to cut through the tree or branch. If theres too much slack in the cable, it could tangle as you cut. When you tie it off, aim for less than 1 inch (22.5 cm) of play on each end.
-
After that, place the pole saw on the ground directly below the area you want to cut. Then slide the saw up to the branch or tree that you wish to remove. Make sure not to wrap the cable around any branches as you do this because it will result in friction and increase your chance of injury.
-
Start cutting by applying light pressure with both hands on your grip handle while pulling down gently on either side of the branch or tree. Keep applying pressure until the branch is removed from the tree’s trunk.
-
If your pole saw gets stuck and wont budge after pulling on it a few times, dont yank it out of there and risk injury. Try taking a step back to cut diagonally around the knot that is holding the cable to the tree. This will often break free stubborn knots and get your pole saw back in working order. If this doesn’t work, you might need to try another knot.
These are some tips to keep in mind when operating a pole chainsaw. Also, ensure you have all the safety gear that is required for your operation.
How To Use A Pole Chain Saw
There are many ways to use a pole chainsaw. However, they can be used for cutting objects suspended in the air (like a branch of a tree), or for cutting things too high that you cannot reach with your arms (such an overhead power line). These are the steps to do both.
Cut A Branch Suspended In Mid-air
- Place the blade of your pole chain saw against the tree with one hand and use your other hand to hold the bottom of the pole just below where it meets the blade. Pull down on the tree and press inwardly on both sides, until you hear a crackling sound.
- After the branch has been mostly separated from the trunk of the tree, you can either let gravity do its job and bring it down to your level or push downward on the pole until it descends to where youre standing.
- After the branch has fallen, tie a piece or twine around it. Then pull on the string to ensure that the branch is secured.
Cutting An Overhead Line (or Any Other Too High For You)
- Use a ladder or tall objects like a bucket or garbage can lid as support while climbing up towards what needs cutting (make sure youre always holding onto something stable while scaling any type of ladder or raising yourself up to a higher elevation).
- Cut the power line carefully so that it falls in the desired place.
- Use a long piece of twine to tie off the severed section of wire so that no one comes into contact with it while its flapping around or laying on the ground. This way, nobody can get hurt by touching an electrified wire and/or falling against it accidentally.
Benefits Of Using A Pole Chain Saw
A pole chainsaw has many benefits, but they are best for certain tasks. For example, if you need to cut a branch off a tree that is too high up for an electric or gas-powered pole saw to reach effectively yet can be done with a manual pole one, then this is a great tool to use. In addition, you can adjust the length of this type of saw by attaching it to a longer or shorter pole in order to increase or decrease your range of motion while working.
Tips For Choosing The Right Pole Chain Saw For Your Needs:
- Make sure that whatever pole chain saw you go with is built to last and wont break after one use.
- A small manual model is ideal if you have a tight space and need a cutting tool for home maintenance.
- For large projects like clearing briars, pick up an extension cord so you can have a greater range of motion.
- The quietest electric pole chainsaws are available. This is an excellent choice if you’re looking for a tranquil environment while still being able to do quick tasks.
- Gas-powered pole saws are more powerful and can tackle many heavy-duty projects.
- It is important to consider the ergonomics of a pole-chain saw.
FAQ,s
How to use a pole chain saw safely?
It doesn’t matter if you are responsible for trimming the overgrown branches of a tree or removing any fallen branches, it is important that you understand how to properly use a pole chainsaw to prevent injury. Children should not be allowed to use electrical appliances if they aren’t supervised. Here are some simple safety precautions everyone should follow when operating this type of equipment:
Always wear the proper gear If your pole chain saw weighs more than 5 kg (4.5 kg), you need to wear protective gloves made out of leather or another sturdy material. These will keep your hands safe while handling it for extended periods of time. Make sure to also wear safety goggles to protect your eyes, steel-toe boots, and thick clothing so nothing gets snagged by the blade while youre sawing away at branches or objects.
Warning
Never operate a pole chain saw without wearing proper safety gear including gloves, sturdy shoes, eye protection, and a hard hat if necessary!
Final Thoughts
A pole chainsaw is an extremely powerful tool that can be used to remove logs and trees. This tool may be the right one for you if your property is home to large trees or other hazards. To use one safely and effectively, follow these tips from an experienced professional in the field. Before you use any power equipment, such as a chainsaw, make sure that there aren’t any high-pressure gas lines nearby. They could explode and cause serious consequences.
